Product features:
1 can adapt to the shipyard specific operating environment, that can be in wet, corrosive, and more dust, high temperature, low temperature environment work.
2 the boom is in any position, the operating platform can safely walk, and the walking speed decreases with the increase of lifting height.
3 is equipped with up and down control console (the ground control console and the platform control console) and the upper and lower control console use commutation switch. The upper control of the use of the lower console lock function.
4 under the control of the diesel engine oil temperature, oil pressure, water temperature, etc..
5 device with anti engine running state to start again.
6 boom telescopic, variable range, stable operation, and has a buffer device.
7 boom telescopic, variable amplitude, turning and walking platform are controlled by electronic hydraulic proportional control, and can realize stepless speed regulation.
8 Platform walking and arm rotation should be equipped with a reliable brake, to ensure that the ramp up and running in the process of reliable control. Install manual rotary lock and release the running brake function, so that the platform is towed.
9 platform when walking, such as a flight case, through the distribution valve, the other wheel can walk normally.
10 when the working arm angle above the horizontal plane, there is a limit to the speed of the vehicle.
11 boom telescopic, range, rotation and platform can work simultaneously to carry out more work.
12 working bucket with automatic leveling function, the working bucket relative to the level of the tilt angle can not be more than 1.5 degrees.
13 up and down the console are equipped with an emergency stop button, when the operation of unexpected circumstances, the operator can quickly put out the engine, to avoid the platform to continue to exercise.
14 the platform should be equipped with a foot switch, only the foot pedal switch can be operated.
15 with 12V auxiliary power unit, when the engine or the main oil pump failure, can make the work of safety to the ground.
16 a program action, only when the tower jib to the maximum angle and tower telescopic arm to extend; only when the tower arm telescopic arm is fully retracted, the tower arm to downward luffing and prevent leans over and tipping backwards, ensure vehicle stability.
17 working bucket has the function of weighing, accurate detection platform load, and the load on the platform has nothing to do. When the platform load exceeds the allowable load, it should be able to display and alarm and limit the movement of the platform to ensure the work of the strength of the bucket and the work of the bucket and the safety of the work.
18 engine throttle control should be three block speed, when there is no longer any action, the engine automatically dropped to low idle speed, to meet the requirements of energy saving.

Model		HKG30	HKG32Z	HKG36	HKG38Z		HKG39	HKG42Z		HKG46Z
Max.work height	mm	32100	33880	38340	40100		41000	44000		47700
Max.platform height	mm	30400	32180	36640	38400		39300	42000		46000
Max.work radius	mm	22860	24580	20500	22900		21500	23000		23400
Rated capacity	kg	480/340	480/230	480/340	480/230		480/260	480/230		480/230
Fold height	mm	12995	14130	13000	14100		13900	13650		13266
Width(Leg fold/lift)	mm	2490/3350	2490/3350	2490/3350	2490/3350		2490/3900	2490/3900		2490/4200
Fold height	mm	3080	3080	3080	3080		3250	3250		3100
Base wheel	kg	3660	3660	3660	3660		3960	3960		4200
Ground gap	mm	430	430	430	430		430	430		430
Work platform size	mm	2440x910	2440x910	2440x910	2440x910		2440x910	2440x910		2440x910
Inner tire rotate radius	mm	4140/2740	4140/2740	4140/2740	4140/2740		4100/3150	4100/3150		4100/3130
Inner rotate radius	mm	6560/5850	6560/5850	6560/5850	6560/5850		7020/6500	7020/6500		7020/6500
Drive speed(fold/lift)	km/h	5.4/1.1	5.4/1.1	5.4/1.1	5.4/1.1		4.4/1.1	4.4/1.1		4.4/1.1
Max.climb speed	%	40	40	40	40		40	40		40
Tire		12.00-20
Rotate speed	rpm	0-1/3
Rotate	°	360
Platform adjust		automatic
Platform rotate	°	±80
Fuel tank capacity	L	151
Total weight	kg	18500	18660	19380		19510	20600		20900	22100
Voltage	V	24
Drive rotate type		4×4×4
Rated weight	kw/rpm	60/2200