Product features:4.1 can adapt to the shipyard specific operating environment, that can be in wet, corrosive, and more dust, high temperature, low temperature environment work.
The 4.2 arm rack is in any position, and the working platform can safely walk, and the walking speed decreases with the increase of the lifting height.
4.3 is equipped with up and down control console (the ground control console and the platform control console) and the upper and lower control console use commutation switch. The upper control of the use of the lower console lock function.
4.4 under the control of the diesel engine oil temperature, oil pressure, water temperature, etc..
4.5 device with anti engine running state to start again.
4.6 boom telescopic, variable range, stable operation, and has a buffer device.
4.7 boom telescopic, variable amplitude, turning and walking platform are controlled by electronic hydraulic proportional control, and can realize stepless speed regulation.
4.8 platform walking and arm rotation should be equipped with a reliable brake, to ensure that the ramp up and running in the process of reliable control. Install manual rotary lock and release the running brake function, so that the platform is towed.
4.9 platform when walking, such as a flight case, through the distribution valve, the other wheel can walk normally.
4.10 when the working arm angle above the horizontal plane, there is a limit to the speed of the vehicle.
4.11 boom telescopic, range, rotation and platform can work simultaneously to carry out more work.
4.12 working bucket with automatic leveling function, the working bucket relative to the level of the tilt angle can not be more than 1.5 degrees.
4.13 up and down the console are equipped with an emergency stop button, when the operation of unexpected circumstances, the operator can quickly put out the engine, to avoid the platform to continue to exercise.
4.14 the platform should be equipped with a foot switch, only the foot pedal switch can be operated.
4.15 with 12V auxiliary power unit, when the engine or the main oil pump failure, can make the work of safety to the ground.
4.16 a program action, only when the tower jib to the maximum angle and tower telescopic arm to extend; only when the tower arm telescopic arm is fully retracted, the tower arm to downward luffing and prevent leans over and tipping backwards, ensure vehicle stability.
4.17 working bucket has the function of weighing, accurate detection platform load, and the load on the platform has nothing to do. When the platform load exceeds the allowable load, it should be able to display and alarm and limit the movement of the platform to ensure the work of the strength of the bucket and the work of the bucket and the safety of the work.
4.18 engine throttle control should be three block speed, when there is no longer any action, the engine automatically dropped to low idle speed, to meet the requirements of energy saving.
Model | | HKG14Q | HKG16Q | HKG18Q | HKG20Q |
Max.work height | mm | 15900 | 17700 | 19700 | 21700 |
Max.platform height | mm | 14200 | 16000 | 18000 | 20000 |
Max.work raduis | mm | 8000 | 9500 | 1043 | 11700 |
Rated weight | kg | 230 |
Hieght | mm | 7750 | 8500 |
Fold length | mm | 6200 | 6800 | 8250 | 9230 |
Width | mm | 2290 | 2350 |
Fold speed | mm | 2380 |
Base wheel | kg | 2200 | 2600 |
Ground gap | mm | 430 |
Work platform size | mm | 1830x760 |
Inner turning radius | mm | 3000 |
Outer turning radius | mm | 5200 |
Drive speed(fold/lift) | km/h | 6.3/1.1 |
Max.climbing speed | % | 40 | 30 |
Tire | | 33x12/-20 |
Rotate speed | rpm | 0-0.8 |
Rotate | ° | 360 |
Platform adjust | | automatic |
Platform rotate | ° | 80 |
Fuel tank capacity | L | 100 |
Total weight | kg | 7577 | 7657 | 7750 | 8617 |
Voltage | V | 12 |
Rate rotate radius | | 4x2x2 |
Motor rated power | kw/rpm | 45/2200 |
