Product features:* with up and down control console (ground console and platform console) and the upper and lower control console using the switch to switch. The upper control of the use of the lower console lock function.
* under the control of the diesel engine oil temperature, oil pressure, water temperature, etc..
Device with anti engine running state to start again.
* boom, horn, swing, and has a buffer device.
Arm telescopic, variable amplitude, rotating and platform walking are controlled by electronic hydraulic proportional control, which can realize stepless speed regulation.
* platform walking and arm rotation should be provided with reliable brakes to ensure reliable control of the ramp up and running. Install manual rotary lock and release the running brake function, so that the platform is towed.
* platform when walking, such as a flight case, through the distribution valve, the other wheel can walk normally.
When the working arm angle is above the horizontal plane, the speed of the vehicle is limited.
* boom, range, turning and walking can be carried out at the same time.
The working bucket has the automatic leveling function, and the inclined angle of the working bucket relative to the horizontal plane can not be more than 1.5 degrees.
* up and down the console are equipped with an emergency stop button, when the operation of the accident, the operator can quickly put off the engine, to avoid the platform to continue to exercise.
The platform shall be provided with a foot pedal switch, only the foot pedal switch can be operated.
* with 12V auxiliary power unit, when the engine or the main oil pump failure, can make the work of safety to the ground.
* with the function of the action program, and only when the tower jib to the maximum angle and tower telescopic arm to extend; only when the tower arm telescopic arm is fully retracted, the tower arm to downward luffing and prevent leans over and tipping backwards, ensure vehicle stability.
* working bucket has the function of weighing, accurate detection platform load, and the load on the platform has nothing to do. When the platform load exceeds the allowable load, it should be able to display and alarm and limit the movement of the platform to ensure the work of the strength of the bucket and the work of the bucket and the safety of the work.
* engine throttle control should be three block speed, when there is no longer any action, the engine automatically dropped to low idle speed, to meet the requirements of energy saving.
* when the machine is parked on the ground that is not more than 3 degrees, the boom will be restricted.
* when the equipment is running and turning, the sound and light alarm will be issued.
Model | | HKG20-1Q | HKG22Q | HKG25Q |
Max.work height | mm | 21700 | 24100 | 25700 |
Max.platform height | mm | 20000 | 22400 | 24000 |
Max.work radius | mm | 13300 |
Rated weight | kg | 230 |
Height | mm | 8750 |
Fold length | mm | 9200 | 10100 | 10700 |
Width | mm | 2490 |
Fold speed | mm | 2820 |
Base wheel | kg | 2600 |
Ground gap | mm | 330 |
Work platform size | mm | 1830x760 |
Inner rotate radius | mm | 3000 |
Ouer rotate radius | mm | 5200 |
Drive speed(fold/lift) | km/h | 6.3/1.1 |
Max.climbing speed | % | 30 |
Tire | | 33x12-20 |
Rotate speed | rpm | 0-1/3 |
Rotate | ° | 360° |
Platform adjust | | automatic |
Platform rotate | ° | 80 |
Fuel tank capacity | L | 100 |
Total weight | kg | 10000 | 10350 | 10550 |
Voltage | V | 12 |
Drive rotate | | 4x2x2 |
Motor rated power | kw/rpm | 45/2200 |
