Feature：

特性 Identification	产品型号Model						HKCPD25
	配置号 Config-code						QB25
	驱动形式Drive Unit						电动Electric
	驾驶方式Operation type						座驾式Seated
	额定载重Load capacity				Q	kg	2000	2500
	载荷中心Load center				C	mm	500
基本尺寸 Dimension	总长Overall length				L	mm	3430	3450
	车体宽度Overall width				b	mm	1150
	总高Overall height				H2	mm	2138 (护顶架)
	起升高度Lift height				H	mm	3000
	作业时最大高度Max working height				H1	mm	4012
	门架静止高度 Min. mast height					mm	2130
	自由提升高度Free lift height				H3	mm	120
	货叉尺寸Fork dimensions		L1×b2×m			mm	1070×122×40
	货叉外宽Maximum fork width			b1		mm	244-1040可调 (Adjustable)
	最小离地间隙Minimum ground clearance			m1		mm	120
	最小直角通道Min. right angle Aisle width					mm	2300
	最小堆垛通道Min. aisle width for stacking			Ast		mm	3980
	门架倾角Mast obliquity			α/β		°	6/12
	轴距Wheelbase			Y		mm	1500
	前悬距Front overhang			X		mm	459
	后悬距Rear overhang			X’		mm	401
	转弯半径Turning radius			Wa		mm	2100
性能 Performance	行驶速度 Travel speed	满载loaded				Km/h	12	11
		空载unloaded				Km/h	13	13
	提升速度 Lift speed	满载loaded				mm/s	230	220
		空载unloaded				mm/s	390	390
	下降速度 Lowering speed	满载loaded				mm/s	400	410
		空载unloaded				mm/s	300	300
	爬坡能力 (满载/空载) Gradeability (Loaded/Unloaded)					%	13/15	12/15
	制动方式Brake type						液压制动 Hydraulic
电机 Electric Motor	驱动电机功率Drive motor power					KW	7.0 AC
	提升电机功率lift motor power					KW	10.0
	蓄电池 Battery					Ah/V	600/48
重量 Weight	净重(不含电池) Weight without battery					kg	3064	3364
	电池重量 Battery weight					kg	936

Detailed notes:

1 US CURTIS controller
2 CURTIS instrument panel with low voltage protection
3 Germany REMA plug-in
4 joystick control fork lift down, leaning back door frame
5 simple forward reverse gears
6 imitation automobile lamp steering rod
7 emergency situations can be pressed red power switch, cut off all power supply, the car immediately stopped
8 seats can be adjusted according to the operator\\\\''\''\\''\''\\\''\''\\''\''\\\\''\''\\''\''\\\''\''\\''\''s weight
9 traction hook

Product features:

The appearance of the whole machine is beautiful and generous, with the latest man-machine engineering design, comfortable, safe, efficient, technical performance can meet the needs of different customers at home and abroad. The use of adjustable steering wheel and seat, the operating system of a reasonable layout, fully embodies the principle of human engineering, reduce the labor intensity of the operator. Engine full floating type damping device, steering bridge elastic connection, low torque steering the pivot steering easier; integral hood for suspension type high strength built-in insulation insulation materials, floor space operation concise and capacious, ensure the comfort of the whole operation.
electrical system
The vehicle electrical system adopts the latest technology of wire harness and waterproof connectors, multi-channel fuse layout to ensure the safety and stability of the system circuit. The integrated circuit board design, easy to repair and maintenance.
Hydraulic system
The hydraulic system uses the SHIMADZU multi - way valve and the gear pump, the soft, hard tube reasonable layout, can greatly reduce the hydraulic pressure to improve the lift, the tilt and so on. Vehicle cylinder seals are imported from Japan "NOK" seal, tens of thousands of times of fatigue testing, to ensure that the system is reliable and stable.
Heat dissipating system
Cooling system using super capacity aluminum pipe belt type radiator, optimization of the cooling channel, further enhance the heat transfer ability of the vehicle, ensure the reliability of the engine.
Door frame
Door frame wide vision design operation, high sensitivity and stable hoisting, flexible steering and smaller turning radius, protect the whole control, flexible, lightweight and efficient operation; lifting oil cylinder buffer device, pipeline system set safety device, even pipeline rupture did not cause the door frame or the goods out of control,
In line with EU safety standards